🏆 Win $200,000 in XMR — Swap $100+ to enter🏆 Win $200K in XMR  ·  Closes Mar 31, 2027 Enter Contest →
All systems operational
Exchange Track Order About Contest FAQ Help
Home / Guides / Address formats

Crypto Address Formats: What a Bitcoin, Ethereum, Solana or Monero Address Looks Like

Swap to your address →
No KYC · No account · Most swaps 5–30 min

How to Recognise a Crypto Address

A crypto address is the string a wallet gives you to receive a coin, and its first characters usually tell you which network it belongs to. A Bitcoin address starts with bc1q, bc1p, 3 or 1; an Ethereum address is 0x plus 40 hex characters and looks the same on BNB Smart Chain and Base; a Solana address is a base58 string of 32 to 44 characters with no fixed prefix; and a standard Monero address starts with 4 and is 95 characters long.

The table covers every network we swap, with prefixes and lengths from each protocol's own documentation or source code. The examples are patterns, not real addresses: bc1q… means "starts with bc1q". Always copy your own address from your wallet's Receive screen. Checked 9 November 2026.

Address Formats at a Glance

Coin / networkStarts with (pattern)LengthBuilt-in checksum
Bitcoin (BTC)bc1q… SegWit, bc1p… Taproot, 3… script (P2SH), 1… legacy42 (bc1q single-key), 62 (bc1p), up to 34 (3 and 1)Yes
Ethereum, BNB Smart Chain, Base (ETH, BNB, ERC-20, BEP-20, Base tokens)0x… then hex (0–9, a–f)42 (0x + 40)Optional: EIP-55 mixed case
Solana (SOL, SPL tokens)No fixed prefix; base58 letters and digits32–44, usually 43 or 44No
Litecoin (LTC)ltc1… SegWit, L… legacy, M… script (older wallets: 3…), ltcmweb1… MWEB34 (L, M); 43 or more (ltc1)Yes
Monero (XMR)4… standard, 8… subaddress, 4… integrated95 (standard, subaddress), 106 (integrated)Yes
Tron (TRX, TRC-20)T…34Yes
XRP Ledger (XRP)r… classic; X… X-address (tag packed in)25–35 (classic)Yes
Dogecoin (DOGE)D… standard, 9… or A… script34Yes
Zcash (ZEC)t1… transparent, t3… multisig, zs1… Sapling shielded, u1… unified, tex1… TEX35 (t1, t3); much longer for zs1 and u1Yes
Dash (DASH)X… standard, 7… script34Yes
Cardano (ADA)addr1… payment address; stake1… is a reward address, not for payments; older Byron addresses use base58Long, often about 100Yes

USDT and USDC use the address format of the network they travel on, so a TRC-20 USDT address is a Tron T… address and a Solana USDC address is a Solana address. Stablecoin-specific details are in our USDT address guide.

Bitcoin Address Formats (With Examples)

Bitcoin has four address types in common use. Any modern wallet can send to all four, so the choice only matters for the wallet that receives.

  • Native SegWit, bc1q…: the default in most wallets. Bech32 encoding (BIP 173), lowercase letters and digits only, 42 characters for a single-key address. Bech32 never uses the characters 1 (after the separator), b, i or o, so they can't be confused with lookalikes.
  • Taproot, bc1p…: 62 characters, using the Bech32m variant defined in BIP 350.
  • Script (P2SH), 3…: used for multisig and older "wrapped SegWit" wallets. BIP 13 sets the version byte that makes these start with 3.
  • Legacy (P2PKH), 1…: the original format, still valid.

A Bitcoin address example in the native SegWit format therefore looks like bc1q followed by 38 more lowercase letters and digits. The Bech32 checksum is designed to detect any error affecting up to 4 characters, so a wallet will normally refuse a mistyped bc1 address. For sending, see how to send Bitcoin.

Ethereum Address: Why the Same 0x Works on BNB Smart Chain and Base

An Ethereum address is the last 20 bytes of the Keccak-256 hash of your public key, written as 0x plus 40 hexadecimal characters. BNB Smart Chain and Base are EVM chains that use exactly the same format, so the same key gives you the same 0x address on all three. A BNB address for BNB Smart Chain is therefore just your 0x address.

The address tells you nothing about the network. The sender's choice decides where the coins travel, and they only show up in your wallet on that network. That has three practical consequences:

  • Always pick the network, not just the coin. "USDC to 0x…" is incomplete; "USDC on Base to 0x…" is not.
  • Exchanges may not credit an unlisted network, even if the address looks identical. Use the network their deposit page names.
  • On Superswap.cx the coin code is the network. USDC-ETH, USDC-BASE and USDC-BSC all pay to a 0x address but on different chains. ETH is paid on Ethereum mainnet only (not Base or any L2), and BNB on BNB Smart Chain only.

Many wallets show 0x addresses in mixed upper and lower case. That is the EIP-55 checksum: according to the EIP, a mistyped address passes it only about 0.0247% of the time. An all-lowercase address is still valid; it just carries no checksum.

Solana Address

A Solana address is a 32-byte public key shown as a base58 string, so it has no 0x and no fixed first letter. Most are 43 or 44 characters long. The same address receives SOL and SPL tokens such as USDC and USDT on Solana; your wallet handles the token accounts behind it.

Solana addresses have no built-in checksum. A typo can still produce a string that looks like a valid address, so always paste instead of typing, and compare the first and last characters. Wallet options are in our Solana wallet guide.

Monero Address

A standard Monero address starts with 4 and is 95 characters long. It encodes your public spend key and public view key plus a 4-byte checksum, in Monero's own base58 variant. Subaddresses start with 8 and are also 95 characters; a wallet can create many of them, so you can give each sender a different one. Integrated addresses start with 4 but are 106 characters, because they also carry an 8-byte payment ID.

When a swap pays XMR to you, paste the address your wallet shows on its Receive screen. Setup is covered in our Monero wallet setup guide.

Tron, XRP, Litecoin, Dogecoin, Zcash, Dash and Cardano

  • Tron address: 34 characters starting with T, in base58check. TRX and TRC-20 tokens such as USDT share it.
  • XRP address: a classic address starts with r and is 25 to 35 characters, with a checksum, so a random string has only about a 1 in 4.3 billion (2³²) chance of being valid. Some services also need a destination tag; see memo and destination tag.
  • Litecoin address: ltc1… for SegWit, L… for legacy and M… for script addresses. Older Litecoin software used Bitcoin's 3… prefix for script addresses. MWEB (private) addresses start with ltcmweb1.
  • Dogecoin address: standard addresses start with D; script addresses with 9 or A.
  • Zcash address: t1… is public like Bitcoin; zs1… and u1… are shielded or unified; tex1… only accepts transparent funds. More in our Zcash wallet guide.
  • Dash address: standard addresses start with X; script addresses with 7.
  • Cardano address: payment addresses start with addr1 (Bech32). A stake1… address is for staking rewards, so don't give it out for payments.

How to Check an Address Before You Send

  1. Copy it from the wallet, never type it. Use the Receive screen or scan the QR code.
  2. Check the prefix against the table. A T… address will never receive BTC, and a bc1… address will never receive ETH.
  3. Compare the first and last 4 to 6 characters after pasting. Clipboard malware can swap a copied address for a lookalike, and a checksum won't catch that, because the swapped address is valid.
  4. Match the network for 0x addresses and for stablecoins: ERC-20, BEP-20 and Base use the same address but different chains.
  5. Check whether a memo or tag is needed. Exchange deposits on XRP and some other networks often need one.
  6. Send a test amount the first time you use a new address or network, especially for large sums.

Using Your Address on Superswap.cx

The swap form asks for one thing: the payout address for the coin you receive. Pick the coin and network, paste your own address, and the coin is sent straight to it once your deposit confirms. Each order gets its own deposit address, the rate is locked for 5 minutes after the order is created, and the minimum is $50.

  • No memo or tag field. If a deposit address at an exchange needs a memo or destination tag, pay out to your own wallet first and move it from there.
  • Zcash: we pay to transparent t1 and to shielded zs1 or unified u1 addresses.
  • XRP deposits: if our deposit details for your order show a destination tag, it is required.

Paste Your Address, Get Your Coin

21 assets on their own networks · No account · No ID · Most swaps 5–30 min

Swap USDT to XMR →

Frequently Asked Questions

What does a Bitcoin address look like?

Most Bitcoin addresses today start with bc1q (native SegWit, 42 characters) or bc1p (Taproot, 62 characters). Older formats start with 3 (script addresses) or 1 (legacy). All four are valid, and any modern wallet can send to them.

What is a Solana address?

A Solana address is a 32-byte public key written as a base58 string, usually 43 or 44 characters with no fixed prefix. The same address receives SOL and Solana tokens such as USDC. It has no checksum, so always paste it instead of typing it.

What does a Monero address look like?

A standard Monero address starts with 4 and is 95 characters long. Subaddresses start with 8 and are also 95 characters, and integrated addresses start with 4 and are 106 characters because they include a payment ID.

Why do my Ethereum, BNB Chain and Base addresses look the same?

They are the same. All three are EVM chains that use the 0x format, so one key gives one address on each. The address doesn't say which network the coins travel on, so the sender, or the swap form, must use the network you intend.

How can I check a crypto address before sending?

Copy it from your wallet instead of typing, check that the prefix matches the coin, compare the first and last characters after pasting, confirm the network, check whether a memo or tag is needed, and send a test amount the first time.