To withdraw from Binance, open Wallet → Overview → Withdraw on the website (or Assets → Spot → Send in the app), choose the coin, paste the receiving address, pick the network that matches that address, add a memo if the destination needs one, check the amount and fee, and confirm with your passkey or 2FA. Kraken, OKX and Robinhood follow the same pattern. The one step that loses money when it goes wrong is the network: it must match the address you're sending to.
Below: each exchange's steps as its own help centre describes them (checked 9 November 2026), choosing the network, memos and tags, test amounts, paused withdrawals, and sending a withdrawal straight into a swap.
0x… format. Our address formats guide shows what each coin's address looks like.0x… address fits more than one network.Go to Assets → Spot → Send, pick the coin, choose Withdraw Crypto, then follow the same address, network, amount and verification steps.
Binance asks for a MEMO when you send to another Binance account or another exchange (other platforms call it a Tag or Payment ID), and warns that leaving out a required memo can lose the funds. You can save addresses in the address book and tick the whitelist option; with the whitelist turned on, your account can only withdraw to whitelisted addresses. Binance also advises not to pick a network because it is cheapest, but the one the receiving platform supports.
Kraken's help article (updated 19 August 2026): click Portfolio → Withdraw and select the crypto. Choose the network your receiving wallet uses; Kraken warns that an incompatible network can mean permanent loss. Enter at least the minimum, paste or scan the address, check the "To" field and enter your funding 2FA code if it's on. Some deposits and purchases put a temporary hold on withdrawals.
OKX's web guide (updated 11 August 2026): go to Assets → Withdraw, enter the address and select a network that matches the deposit network at the receiving exchange or wallet. Enter an amount above the minimum; the network fee is shown before you confirm. For coins that use tags, such as XRP, OKX says to fill in both the address and the tag, or the withdrawal will be lost. Finish with 2FA. OKX also offers an allowlist mode that limits withdrawals to saved addresses.
In a Robinhood Crypto account you first verify your identity to turn on crypto transfers (usually quick, but Robinhood allows up to 5 business days). Then open the coin's page, tap Send, paste the address, enter the amount and tap Review → Submit. Robinhood shows its network fee estimate first, says to use the correct network, notes that some assets need a memo or tag, and that transfers are final. Limits depend on factors such as your verification level.
Coinbase's and Bybit's help pages did not load for us on 9 November 2026, so this guide gives no exchange-specific steps for them. The checks above (network, memo, minimum, fee, test amount) apply to them as well; follow the withdrawal form in your account.
Exchanges name networks differently ("TRC20", "TRON", "Tron (TRC-20)"), so match the chain, not the label. The network you choose must be the one the receiving address belongs to.
| Receiving address is for | Address looks like | Network to pick on the exchange | Superswap.cx deposit code |
|---|---|---|---|
| USDT on Tron | T… | Tron (TRC-20) | USDT-TRX |
| USDT or USDC on Ethereum | 0x… | Ethereum (ERC-20) | USDT-ETH, USDC-ETH |
| USDT, USDC or BNB on BNB Smart Chain | 0x… (same format as Ethereum) | BNB Smart Chain (BEP-20) | USDT-BSC, USDC-BSC, BNB |
| USDC on Base | 0x… (same format as Ethereum) | Base | USDC-BASE (USDC only) |
| USDT, USDC or SOL on Solana | Base58, no fixed prefix | Solana | USDT-SOL, USDC-SOL, SOL |
Because the 0x address is the same on Ethereum, BNB Smart Chain and Base, sending to MetaMask or a Ledger account doesn't decide the network for you: you do, in the withdrawal form. USDT on BNB Smart Chain is the Binance-Peg token issued by Binance, a different token from Tether's USDT on Tron or Ethereum, so withdraw it to a USDT-BSC order or address only. More in our USDT address guide.
USDT-BSC in, XMR out to your own wallet · Most swaps 5–30 minutes
Swap USDT (BEP-20) to XMR →For a new address in your own wallet, send a small amount (at least the exchange's minimum) and wait until it arrives before sending the rest. One extra network fee confirms the address, network and memo together.
Don't test against a swap order's deposit address: a Superswap.cx order is quoted for the amount you entered and the minimum is $50, so send the full amount in one withdrawal.
Search for "Binance withdrawal suspended" and you'll mostly find a routine cause. Binance's FAQ lists the usual reasons for pausing deposits and withdrawals on a network: wallet software or hardware upgrades, a hard fork or network upgrade the wallet has to be tested against, heavy network congestion, and hot-wallet balances that need rebalancing between networks. Trading keeps working meanwhile.
Binance's Set Reminder button tells you when the network is back, or you can choose another network the destination supports. A hold on your own account rather than a network is one for the exchange's support team. Our exchange KYC limits table shows what each exchange lets an unverified account withdraw.
An exchange withdrawal can go straight to a Superswap.cx deposit address, so the coin you withdraw arrives in your wallet as a different coin, for example USDT on Tron in and Bitcoin out. There's no account to open and ID documents are not routinely requested.
If the exchange takes longer than 5 minutes to send, the quote can expire. Create a new order, or contact support at service@superswap.cx with your order details if the coins were already sent. When an exchange's processing time is long or unpredictable, withdraw to your own wallet first and create the order once the coins have arrived.
You don't need a memo: the order form takes a payout address only, and the deposit address belongs to your order. The exception is XRP: if Superswap.cx's deposit details show a destination tag, it is required, so enter it in the exchange's tag field. If the address you want to be paid to needs a memo (another exchange, for example), pay out to your own wallet first.
Send USDT-TRX from your exchange · Rate locked for 5 minutes · No account · From $50
Swap USDT (TRC-20) to BTC →On the website go to Wallet → Overview → Withdraw (in the app: Assets → Spot → Send → Withdraw Crypto), choose the coin, paste your wallet's address, select the network that address uses, enter the amount, review the fee and confirm with your passkey or 2FA.
Usually because that network is under wallet maintenance: an upgrade, a hard fork, congestion or hot-wallet rebalancing, according to Binance's FAQ. Use Set Reminder to be told when it's back, or pick another network the destination supports. Trading continues during maintenance.
The one the receiving address is on. A T… address needs Tron (TRC-20). A 0x address could be Ethereum, BNB Smart Chain or another chain, so check what the receiving wallet or order expects before choosing.
Only if the destination asks for one, which is common for exchange deposit addresses and coins like XRP. Your own wallet normally doesn't need one. A Superswap.cx order address needs none, except an XRP destination tag if one is shown.
Yes. Create the order when the withdrawal is ready, then send to the order's own deposit address within the 5-minute rate lock. If the exchange is slow, the quote can expire; create a new order or contact support, or withdraw to your own wallet first.
Checked 9 November 2026.
When a deposit needs a memo or tag.
📋TRC-20, ERC-20, BEP-20 and Solana addresses.
🔤What each coin's address looks like.
📤Wallet to wallet and wallet to exchange.
🪪What you can withdraw without verification.
👛Where to hold USDT on each network.