🏆 Win $200,000 in XMR — Swap $100+ to enter🏆 Win $200K in XMR  ·  Closes Mar 31, 2027 Enter Contest →
All systems operational
Exchange Track Order About Contest FAQ Help
Home / Guides / How to send crypto

How to Send Crypto: Transfer Coins Between Wallets and Exchanges on Any Network

Get the fee coin you need →
No KYC · No account · Most swaps 5–30 min

How to Send Crypto in Short

To send crypto, open your wallet's Send screen, paste the recipient's address, make sure you are sending on the same network the recipient expects, enter the amount and confirm. The network fee is paid in that chain's own coin, so the wallet must hold some of it. To receive crypto, open Receive, pick the coin and network, and share the address shown.

Two mistakes cause most failed transfers: choosing the wrong network and having no coin left to pay the fee. This guide covers both for Ethereum, BNB Smart Chain, Solana, Litecoin, Tron and the XRP Ledger, then shows how to move funds between a wallet such as MetaMask or Phantom and an exchange. Bitcoin has its own walk-through in how to send bitcoin. Network rules below were checked against each project's own documentation on 9 November 2026.

The Checklist for Any Crypto Transfer

  1. Get the address from the recipient's Receive or Deposit screen, for the exact coin and network, every time.
  2. Match the network. USDT, USDC and many other tokens exist on several chains. The network you send on must be the one the address was created for.
  3. Hold the fee coin. Sending a token still costs the chain's native coin: ETH on Ethereum, BNB on BNB Smart Chain, SOL on Solana, TRX (or energy) on Tron.
  4. Look for a memo or tag. If an exchange's deposit screen shows one, it is required. See memos and destination tags.
  5. Check the pasted address against the original: the start, the end and a few characters in the middle.
  6. Send a small test to a new address before a large amount, and keep the transaction hash until the funds arrive.

Network by Network: Addresses and Fees

NetworkAddress looks likeFee paid inWatch out for
Ethereum0x plus 40 hex charactersETH (gas)Token transfers need ETH too
BNB Smart ChainSame 0x format as EthereumBNB (gas)Same address, separate balances
SolanaBase58, 32 to 44 charactersSOLMinimum balance (rent) per account
Litecoinltc1, L or MLTCFunds in MWEB
TronT…, 34 charactersBandwidth and energy, or burned TRXUSDT needs energy
XRP Ledgerr…, 25 to 35 charactersXRP (destroyed, not paid to anyone)Account reserve; destination tags

For every format with examples, see crypto address formats.

How to Send on Each Network

Ethereum (ETH and ERC-20 tokens)

Every Ethereum transaction pays gas in ETH. A plain ETH transfer is the simplest kind; a token transfer such as USDT or USDC is a smart-contract call, which uses more gas, and it is still paid in ETH. A wallet holding only USDT on Ethereum cannot send it. More in the Ethereum wallet guide.

BNB Smart Chain (BNB and BEP-20 tokens)

BNB Chain's documentation says any Ethereum wallet can be used with BNB Smart Chain, and gas there is paid in BNB. MetaMask shows the same 0x address on both networks, but the balances are separate, so switch the wallet to BNB Smart Chain before you send BNB or BEP-20 USDT. On this chain, USDT and USDC are Binance-Peg tokens issued by Binance. See the BNB wallet guide.

Solana (SOL and SPL tokens)

Solana fees are paid in SOL: a small base fee per signature plus an optional priority fee. Every account also has to keep a minimum balance, called rent, and each token you hold lives in its own token account. Leave some SOL in the wallet, because a wallet with USDC but no SOL can't move it. Current figures are in the Solana wallet guide.

Litecoin (LTC)

Litecoin works like Bitcoin with a block about every 2.5 minutes, so transfers confirm quickly and the fee is paid in LTC. If your wallet keeps part of the balance in the optional MWEB privacy layer, move it to a regular address first when the destination is an exchange or swap deposit. See the Litecoin wallet guide.

Tron (TRX and TRC-20 USDT)

Tron has no gas price. Transactions use bandwidth, and token transfers such as USDT also use energy. Activated accounts get a free daily bandwidth allowance that usually covers a plain TRX transfer, but energy has no free allowance, so without staked energy the network burns TRX. A wallet with USDT and no TRX cannot send USDT. Details in Tron energy and fees.

XRP Ledger (XRP)

The transaction cost is tiny and is destroyed rather than paid to anyone. The bigger rule is the reserve: on 9 November 2026 the XRP Ledger docs give a base reserve of 1 XRP, plus 0.2 XRP for each object such as a trust line. That XRP stays locked in the account, so you can't send it all. A payment to a brand-new address must deliver at least the base reserve to create the account. Exchanges usually ask for a destination tag, which you must include.

How to Receive Crypto

  • Pick the coin and network on the Receive screen. The address shown is for that network only. On Ethereum, BNB Smart Chain and other EVM networks the same 0x address appears, but a deposit only shows on the network it was sent on.
  • New Tron address? It becomes an active account once it receives TRX. Ask for TRX first if you will need to send tokens later.
  • New XRP address? The first payment must be at least the 1 XRP base reserve.
  • New Solana token? The sender usually creates your token account as part of the first transfer, so you don't need to do anything.

Wallet to Exchange: MetaMask or Phantom to Binance

The receiving exchange sets the network, so start on its deposit page, not in your wallet. Binance's own help page asks you to make sure the selected deposit network is the same as the network of the platform you are sending from, and warns that funds sent on the wrong network might be lost.

  1. On Binance: open Wallet, then Deposit, choose the coin, then choose the network you will send on. Copy the deposit address, plus the memo or tag if one is shown.
  2. From MetaMask: switch MetaMask to that same network (Ethereum for ERC-20, BNB Smart Chain for BEP-20), tap Send, paste the address, enter the amount and confirm. Keep ETH or BNB for the gas.
  3. From Phantom: for SOL or Solana USDC/USDT, pick the Solana network on Binance's deposit page, then send from Phantom with a little SOL left for the fee.
  4. Wait for the exchange's confirmations and keep the transaction hash in case support needs it.

Going the other way, from an exchange to your own wallet or straight into a swap, is covered in how to withdraw from an exchange.

Stuck Without the Fee Coin? Get It Without an Account

Pay with a coin on another network and receive TRX, BNB or another fee coin at the same address · Rate locked for 5 minutes · From $50

Swap BTC to TRX →

The two top-up routes need a little TRX or BNB already, because the deposit itself is a token transfer. With none at all, pay from another network.

Which Crypto Is Cheapest to Transfer?

No single coin wins every time, because fees depend on each network's design and on demand at that moment. As a rule of thumb:

  • Bitcoin charges by transaction size and block-space demand, so fees vary widely. See Bitcoin fees explained.
  • Ethereum gas also rises with demand, and token transfers use more gas than plain ETH transfers.
  • Litecoin keeps Bitcoin's fee model, but a block comes about every 2.5 minutes instead of 10, so a transfer confirms sooner.
  • Solana charges a small base fee per signature, plus an optional priority fee.
  • Tron covers a plain TRX transfer from the free daily bandwidth in most cases, but USDT needs energy, so staked TRX makes frequent token transfers cheaper.
  • BNB Smart Chain works like Ethereum, with gas paid in BNB.
  • XRP has a very small transaction cost, but the account reserve stays locked.

The cheapest network only helps if the receiver supports it. An exchange that only accepts ERC-20 USDT needs ERC-20 USDT. When the network you hold is not the one you need, a swap from one network to the other is one transfer instead of several.

Sending Into a Superswap.cx Order

Each order gets its own deposit address, shown with the exact amount and network. Send that amount in one transaction within the 5-minute rate lock, from a wallet or an exchange. The order form takes a payout address only, with no memo field. Most swaps finish 5–30 minutes after the deposit confirms; follow yours on the tracking page.

Frequently Asked Questions

How do I send crypto from MetaMask to Binance?

On Binance, open Deposit, pick the coin and the network you will use, and copy the address. In MetaMask, switch to that same network, tap Send, paste the address and confirm. Keep some ETH or BNB in MetaMask for the gas.

What is the cheapest crypto to transfer?

It depends on the network and on demand at the time. A plain TRX transfer usually fits in Tron's free daily bandwidth, Solana and the XRP Ledger charge small per-transaction fees, and Bitcoin and Ethereum fees rise when they are busy. The receiver also has to support the network you choose.

How do I receive crypto?

Open your wallet's Receive screen, choose the coin and the network, and share the address or QR code. The sender must use the same network. A new Tron address activates when it receives TRX, and a new XRP address needs at least the base reserve in its first payment.

What happens if I send crypto on the wrong network?

The receiver may not credit it. If you control the same address on the other network, as with 0x addresses on Ethereum and BNB Smart Chain, you can often recover it by switching networks in your wallet. If an exchange received it, only its support can help, and Binance warns such funds might be lost.

Why can't I send my USDT?

Usually the wallet has none of the network's fee coin: ETH on Ethereum, BNB on BNB Smart Chain, SOL on Solana, or TRX or energy on Tron. Add a little of that coin, then send again.

Need BNB for BEP-20 Gas?

BNB paid out on BNB Smart Chain to your 0x address · No account, no ID · Network fee in the quote

Swap BTC to BNB →